bueno ya estoy otra vez por aqui haber si algun alma caritativa se apiada de mi,resetee y configure el 5660 para ya.com navega a las mil maravillas le he instalado un router belkin que ademas es inalambrico y el portatil se conecta a internet tambien ok,el problema viene ahora no se si este sera el sitio adecuado para postear esto pero bueno si no algun moderador que lo cambie,cuando conecto el overnet siempre me da firewalled es decir ip baja,he abierto los puertos del 5660,del router, he formateado y reinstalado el windows xp para quitar el sp2 ya que por el punto de restauracion no pude,le he quitado al router el firewal,y todavia me sigue dando firewalled.compañeros de donde saca el overnet el firewall si no lo tengo puesto en ningun sitio,se lo a comprao el o que.venga admito sugerencias y gracias por estar siempre ahi.Unsaludazo PIRULILLA.
PIRULILLA ZoNeR@
Registrado: Dec 19, 2004
Mensajes: 29
Publicado:
Viernes 07 Enero 2005, 23:03
por cierto un par de apuntes a mi me descargan el copon 10,12,15kb y yo no paso de 9,12,,15kb algunas veces ,eha nada mas lo dicho,Unsaludazo PIRULILLA
PIRULILLA ZoNeR@
Registrado: Dec 19, 2004
Mensajes: 29
Publicado:
Sábado 08 Enero 2005, 1:05
segun el escan de puertos de este foro ¿es esto normal?:Your system ports are now being scanned and the results will be returned shortly...
Results from quick scan at TCP/IP address: 81.37.5.32
Ideally your status should be "Blocked". This indicates that your ports are not only
closed, but they are completely hidden (stealthed) to attackers.
Service Ports Status Additional Information
FTP DATA 20 BLOCKED This port has not responded to any of our probes. It appears to be completely stealthed.
FTP 21 BLOCKED This port has not responded to any of our probes. It appears to be completely stealthed.
SSH 22 BLOCKED This port has not responded to any of our probes. It appears to be completely stealthed.
TELNET 23 BLOCKED This port has not responded to any of our probes. It appears to be completely stealthed.
SMTP 25 BLOCKED This port has not responded to any of our probes. It appears to be completely stealthed.
DNS 53 BLOCKED This port has not responded to any of our probes. It appears to be completely stealthed.
DCC 59 BLOCKED This port has not responded to any of our probes. It appears to be completely stealthed.
FINGER 79 BLOCKED This port has not responded to any of our probes. It appears to be completely stealthed.
WEB 80 BLOCKED This port has not responded to any of our probes. It appears to be completely stealthed.
POP3 110 BLOCKED This port has not responded to any of our probes. It appears to be completely stealthed.
IDENT 113 BLOCKED This port has not responded to any of our probes. It appears to be completely stealthed.
Location Service 135 BLOCKED This port has not responded to any of our probes. It appears to be completely stealthed.
NetBIOS 139 BLOCKED This port has not responded to any of our probes. It appears to be completely stealthed.
HTTPS 443 BLOCKED This port has not responded to any of our probes. It appears to be completely stealthed.
Server Message Block 445 BLOCKED This port has not responded to any of our probes. It appears to be completely stealthed.
SOCKS PROXY 1080 BLOCKED This port has not responded to any of our probes. It appears to be completely stealthed.
UPnP 5000 BLOCKED This port has not responded to any of our probes. It appears to be completely stealthed.
WEB PROXY 8080 BLOCKED This port has not responded to any of our probes. It appears to be completely stealthed.
Results from scan of commonly used trojans at TCP/IP address: 81.37.5.32
Service Ports Status Possible Trojans
Trojan 1243 BLOCKED This port has not responded to any of our probes. It appears to be completely stealthed.
Trojan 1999 BLOCKED This port has not responded to any of our probes. It appears to be completely stealthed.
Trojan 6776 BLOCKED This port has not responded to any of our probes. It appears to be completely stealthed.
Trojan 7789 BLOCKED This port has not responded to any of our probes. It appears to be completely stealthed.
Trojan 12345 BLOCKED This port has not responded to any of our probes. It appears to be completely stealthed.
Trojan 31337 BLOCKED This port has not responded to any of our probes. It appears to be completely stealthed.
Trojan 54320 BLOCKED This port has not responded to any of our probes. It appears to be completely stealthed.
Trojan 54321 BLOCKED This port has not responded to any of our probes. It appears to be completely stealthed.
Results from scan of ICMP at TCP/IP address: 81.37.5.32
Protocol Type Status Additional Information
ICMP 8 OPEN An ICMP ping request is usually used to test Internet access. However, an attacker can use it to determine if your computer is available and what OS you are running. This gives him valuable information when he is determining what type of attack to use against you.
You are not fully protected:
We have detected that some of our probes connected with your computer.
| Home | Company | Products | News | Downloads | Buy | Support | Partners | Contact Us |
1997-2003 Sygate Technologies, Inc.
All content, brands, and products referenced herein are the trademarks or registered trademarks of their respective holders. Sygate® is a registered trademark of Sygate Technologies, Inc. No part of this document may be reproduced or transmitted in any form or by any means, electronic, mechanical, or otherwise, without prior written permission of Sygate Technologies, Inc. Please be advised that Sygate Technologies, Inc. actively and aggressively enforces its intellectual property rights to the fullest extent of the law.
PIRULILLA ZoNeR@
Registrado: Dec 19, 2004
Mensajes: 29
Publicado:
Sábado 08 Enero 2005, 1:51
y esto como se come:
We are now determining if you have a firewall blocking UDP ports on IP: 81.37.5.32
Note: this may take a while on highly secure systems...
We have determined that you have a firewall blocking UDP ports!
We are unable to scan any more UDP ports on IP: 81.37.5.32 . . .
You have blocked all of our probes! We still recommend running this test both with
and without Sygate Personal Firewall enabled... so turn it off and try the test again.
| Home | Company | Products | News | Downloads | Buy | Support | Partners | Contact Us |
1997-2003 Sygate Technologies, Inc.
All content, brands, and products referenced herein are the trademarks or registered trademarks of their respective holders. Sygate® is a registered trademark of Sygate Technologies, Inc. No part of this document may be reproduced or transmitted in any form or by any means, electronic, mechanical, or otherwise, without prior written permission of Sygate Technologies, Inc. Please be advised that Sygate Technologies, Inc. actively and aggressively enforces its intellectual property rights to the fullest extent of the law.
MrBunbury Javier Sanz
Registrado: Oct 25, 2004
Mensajes: 21060
Publicado:
Sábado 08 Enero 2005, 6:31
Bueno son las 6 y media de la mañana y casi que me vy a ir a la cama XD pero bueno he visto el post...
¿Cúales son los puertos del overnet? ¿Los mapeas hacia la IP privada del PC?
¿Tienes algún antivirus en el PC?
El scan de puertos sólo te dice cuando un peurto está abierto si está en ese momento en uso. Por ejemplo si tienes abierto el puerto 21 pero tienes la FTP cerrada, aparecerá como BLOCKED así que no te preocupes por eso.
Es igual que el scan de puertos del emule, que muchas veces haces un test y da firewalled sin embargo los puertos están abiertos y da ID alta.
Un saludo y me piro a sobar XDDD
_________________ Soy cliente de la tarifa de Pepephone Pulpo Pepe y pago 0 céntimos el primer minuto siempre a todos los operadores http://www.pepephone.com/promo...index.html
PIRULILLA ZoNeR@
Registrado: Dec 19, 2004
Mensajes: 29
Publicado:
Sábado 08 Enero 2005, 11:43
jejejeje de donde vendras a estas horas canalla bueno te explico como dije en el primer post formatee y instale el xp solo con el sp1 y el firewall esta desactivado,el del router tambien esta desactivado y el speedstream me parece que no tiene.a mi me da la sensacion de que tengo algo mal configurado, no se pero lo raro es que navegar no hay problema y si descargo algo con el gestor de descargas descarga rapido pero tiene que ser algo de los puertos upd los he mapeado en el router y en el modem hacia la ip del pc pero nada.ya no se por donde tirar y algose me escapa pero bueno paciencia .un saludazo PIRULILLA
MrBunbury Javier Sanz
Registrado: Oct 25, 2004
Mensajes: 21060
Publicado:
Sábado 08 Enero 2005, 14:00
Entra en la pantalla donde abres los puertos y pasteamemelo ok?
Donde aparecen todos listados que sale el puerto la IP y una papelera para borrarlos. A ver que lo vea
_________________ Soy cliente de la tarifa de Pepephone Pulpo Pepe y pago 0 céntimos el primer minuto siempre a todos los operadores http://www.pepephone.com/promo...index.html
PIRULILLA ZoNeR@
Registrado: Dec 19, 2004
Mensajes: 29
Publicado:
Sábado 08 Enero 2005, 14:20
naptserver Network Address Port Translation (NAPT) Servers
This command configures one or more Network Address Port Translation (NAPT) servers on the host system. A NAPT server needs to be configured for each type of service that you want to allow through the router.
For example, if a host on the local area network side of the router provides a web server that users need to access from the WAN side, you would need to configure a NAPT server using a Protocol of TCP or UDP, with a Port of "http", and with the IP Address of the host system that provides the web server.
Configured NAPT Servers
Transport Service Server Del
tcp 23/telnet self
tcp 21/ftp self
tcp 80/http self
udp 4665/4665 192.168.2.3
tcp 4662/4662 192.168.2.3
_________________ Soy cliente de la tarifa de Pepephone Pulpo Pepe y pago 0 céntimos el primer minuto siempre a todos los operadores http://www.pepephone.com/promo...index.html
PIRULILLA ZoNeR@
Registrado: Dec 19, 2004
Mensajes: 29
Publicado:
Sábado 08 Enero 2005, 15:55
que le pongo en vez de self? y esos son los dos que tengo en opciones y red ahora le he puesto el 61123 y me dice probando en vez de firewalled y tambien se los he mapeado al modem y al router.gracias por las molestias que te ocasiono.
PIRULILLA ZoNeR@
Registrado: Dec 19, 2004
Mensajes: 29
Publicado:
Sábado 08 Enero 2005, 16:00
ahora esta asi:
Configured NAPT Servers
Transport Service Server Del
tcp 23/telnet self
udp 61123/61123 192.168.2.3
tcp 21/ftp self
tcp 80/http self
udp 4665/4665 192.168.2.3
tcp 4662/4662 192.168.2.3
los self tengo que quitarlos o rectificarlos espero a que me digas algo y gracias
MrBunbury Javier Sanz
Registrado: Oct 25, 2004
Mensajes: 21060
Publicado:
Sábado 08 Enero 2005, 16:02
Si no usas Telnet (remótamente) o una FTP quítalos. Sino mapealos hacia la IP privada del PC.
Los puertos del Overnet ahora me los miro que va a estar ahí el problema.
¿Antivirus tienes? Panda, norton....
_________________ Soy cliente de la tarifa de Pepephone Pulpo Pepe y pago 0 céntimos el primer minuto siempre a todos los operadores http://www.pepephone.com/promo...index.html
PIRULILLA ZoNeR@
Registrado: Dec 19, 2004
Mensajes: 29
Publicado:
Sábado 08 Enero 2005, 16:19
no lo he desinstalado hasta que abra el overnet del todo los self luego los modificare
_________________ Soy cliente de la tarifa de Pepephone Pulpo Pepe y pago 0 céntimos el primer minuto siempre a todos los operadores http://www.pepephone.com/promo...index.html
PIRULILLA ZoNeR@
Registrado: Dec 19, 2004
Mensajes: 29
Publicado:
Sábado 08 Enero 2005, 22:00
encontre este link con manual en español por si lo quereis aprovechar:
Ver tema siguiente Ver tema anterior Puede publicar nuevos temas en este foro Puede responder a temas en este foro No puede editar sus mensajes en este foro No puede borrar sus mensajes en este foro No puede votar en encuestas en este foro